Elite Master

Type 4 extra hard resin reinforced dental die stone for fixed prosthesis and implantology

Learn more about the whole range of CAD CAM products here >>


  • The resin particles inside the formulation provide high elasticity and splintering resistance for optimal chamfering
  • The resin particles reduce water absorption guaranteeing the accuracy of the model
  • Operator safety due to a formaldehyde free formula
  • All elite master colours are optimised for detection by all modern laser and optical scanners
  • Low expansion, even after 48 hours


  • High mechanical characteristics
  • Compact, marble-like finish
  • Accurate reproduction of detail
  • Available in three different colours: Desert Sand, Sandy Brown, Soft Grey


Zhermack recommends using:

  • Gypstray, for removing stone residues
  • Elite mix, its fully electronic management guarantees a constant mixing quality as well as a silent operation

Technical Data

ISO 6873* 
Water/powder ratio21 ml / 100 g
Mixing time (manual)60''
Mixing time (vacuum)30''
Working time 12'
Setting time (Vicat)14'
Removal time**45'
Expansion after 2 h0.08 %
Expansion after 48 h0.19 %
Compressive strenght after 1 h50 MPa (510 kg/cm²)
Compressive strenght after 48 h75 MPa (765 kg/cm²)

* Data referred to 20 ml water / 100 g powder ratio
** The specified times may change depending on the impression material used


C4104001 bag Desert Sand, 200 g

C4104011 bag Desert Sand, 1 kg
C4104091 bag Sandy Brown, 1 kg
C4104051 bag Soft Grey, 1 kg

C4104021 bag Desert Sand, 3 kg
C4104101 bag Sandy Brown, 3 kg
C4104061 bag Soft Grey, 3 kg

C4104031 sack Desert Sand, 25 kg
C4104111 sack Sandy Brown, 25 kg
C4104071 sack Soft Grey, 25 kg

C4104041 drum Desert Sand, 25 kg
C4104121 drum Sandy Brown, 25 kg
C4104081 drum Soft Grey, 25 kg



C305120Elite Mix mixer for gypsums and investments 230 V
C305125Elite Mix mixer for gypsums and investments 115 V



C300992 C410461C410462
Rubber bowl Measuring scoopWater dispenser
SpatulaMeasuring set 
To read all the documents in PDF format, you need to download a PDF viewer program. We suggest Adobe® Acrobat® Reader program, available for free from the following web site: www.adobe.com Note: programs versions are available for all operating systems.

© Zhermack SpA - All rights reserved - Via Bovazecchino, 100 45021 Badia Polesine (RO), Italy
Tel. +39 0425 597611 - Fax. +39 0425 53596 - Email web@zhermack.com
P.IVA 00594630295 - C.F. P.IVA IT00594630295 - R.E.A. 86603 - R.I. RO 00594630295 - M. RO 001381Isc. Reg. A.E.E. IT07111000002 - Cap. Soc. € 1.032.000,00

Credits - Terms and Conditions of Use - Work with us