Gingifast CAD

Reproduction of gum morphology on models using scannable A-silicone

Learn more about the whole range of CAD CAM products here >>



  • Perfectly reflective surface, suitable for scanning with laser or structured light CAD/CAM systems
  • Two versions: Rigid (70 Sh-A) and Elastic (40 Sh- A), ideal for producing silicone gums on models with prostheses, bridges and crowns
  • Both versions can be finished with a knife or bur, thanks to the formula with innovative raw materials
  • Gingifast CAD is perfectly compatible with any direct or indirect artificial gum fabrication technique
  • The innovative Gingifast CAD formula allows use of very small mixing tips, reducing silicone waste


  • Hardness versions: Elastic 40 Shore-A, Rigid 70 Shore-A
    • Pink
    • Setting Time: 10min
    • Mixing ratio 1:1

Technical Data

 Gingifast ElasticGingifast Rigid
Mixing ratio Base:Catalyst1:11:1
Working time (23°C/73°F)2'2'
Setting Time 10'10'
Hardness (Shore A)4070


C203226 Gingifast CAD Elastic 50ml cartridge, 6 blue tips, 10ml bottle Separator
C203231Gingifast CAD Rigid 50ml cartridge, 6 blue tips, 10ml bottle Separator
C203227Gingifast CAD Elastic 2x50ml cartridge, 12 blue tips, 10ml bottle Separator
C203232Gingifast CAD Rigid 2x50ml cartridge, 12 blue tips, 10ml bottle Separator


C400887 10ml bottle Separator for Gingifast
C203233 Blue mixing tips (x48)
C202100 Dispenser D2 - 1:1


To read all the documents in PDF format, you need to download a PDF viewer program. We suggest Adobe® Acrobat® Reader program, available for free from the following web site: Note: programs versions are available for all operating systems.

© Zhermack SpA - All rights reserved - Via Bovazecchino, 100 45021 Badia Polesine (RO), Italy
Tel. +39 0425 597611 - Fax. +39 0425 53596 - Email
P.IVA 00594630295 - C.F. P.IVA IT00594630295 - R.E.A. 86603 - R.I. RO 00594630295 - M. RO 001381Isc. Reg. A.E.E. IT07111000002 - Cap. Soc. € 1.032.000,00

Credits - Terms and Conditions of Use - Work with us