Image

Press  |  Fairs  |  Contacts

Esegui ricerca

Select  language 

Euclide

DescriptionDetailDownload

With laser pointing - fixed chuck (M.F.)
With laser pointing - pincer chuck (M.P.)

Advantages

  • Laser aiming guarantees maximum drilling precision
  • Plate adjustment system guarantees correct drilling depth
  • Pull-out plaster tay easily removed and cleaned
  • 1-year warranty

Characteristics

  • Drilling depth can be regulated
  • Equipped with laser guiding
  • Drill heads, core pins, positioning pins and sheaths on both models
  • The Euclide M.F. fixed chuck can only mount drill heads with Ø 3 mm stem
  • The Euclide M.P. collect chuck can mount drill heads between Ø of 2.7 and 3.2 mm stem

 

C307001 EUCLIDE M.F. LASER     Discontinued product, available while supplies last.

Technical Data

Euclide M.F.

Model Euclide M.F.
Size L20 cm / P18 cm / H63.5 cm
Speed 2800 rpm
Total power 50 Watt
Voltage (V - Hz) 230 V ± 10% / 50-60 Hz
Weight 7.5 Kg

Euclide M.P.

Model Euclide M.P.
Size  L20 cm / P18 cm / H63.5 cm
Speed 2800 rpm
Total power 50 Watt
Voltage (V - Hz) 230 V ± 10% / 50-60 Hz
Weight  7.5 Kg

Packaging

C307001 Euclide M.F. Laser Fixed chuck
C307003 Euclide M.P. Laser Pincer chuck

Standard components

XR0200040 Cylindrical drill heads, SIZE 2 mm STEM 3 mm
XR0202010 Core pins, 100 pcs
XR0202070 Seaths, 100 pcs
XR0202050 Positioning pins, 100 pcs
XH9900005 Allen wrench 2mm for Euclide M.F.

Accessories

XR0200040 Cylindric drill head SIZE 2 mm STEM 3 mm
XR0200060 Cylindric drill head SIZE 1.5 mm STEM 3 mm
XR0200070 Special double hole drill head SIZE 2-3 mm STEM 3 mm 
XR0201040 Plexiglass  bases (10 pcs)
XR0200050 Cone drill head SIZE 2.10 x 3 mm STEM 3 mm
XR0201060 Cone pins (100 pcs) 
XR0201070 Cone pins  (1000 pcs) 
XR0202020 Smooth top pins ø 2 mm  (1000 pcs)
XR0202010 Smooth top pins ø 2 mm  (100 pcs)
XR0202030 Smooth top pins ø 1.5 mm (100 pcs)
XR0202040 Smooth top pins ø 1.5 mm  (1000 pcs)
XR0202060 Position pin (1000 pcs)
XR0202050 Position pin (100 pcs)
XR0202080 Plastic case for XR0202020 (1000 pcs)
XR0202070 Plastic case for XR0202010 (1000 pcs)
XR0202090 Plastic case for XR0202030 (1000 pcs)
XR0202100 Plastic case for XR0202040 (1000 pcs)
XR0202110 Special pins without case, long double head shaft ø top 2 and 3 mm (100 pcs) 
XR0202120 Special pins without case, long double head shaft ø top 2 and 3 mm  (1000 pcs)
XR0202130 Special pins without case, short double head shaft ø top 2 and 3 mm (100 pcs)
XR0202140 Special pins without case,  short double head shaft ø top 2 and 3 mm (1000 pcs)
XR0203010 Small knurled pin (100 pcs) 
XR0203020 Small knurled pin (1000 pcs )
XR0203030 Small knurled pin with drill (100 pcs)
XR0203040 Small knurled pin with drill (1000 pcs) 
XR0203050 Medium knurled pin (100 pcs)
XR0203060 Medium knurled pin (1000 pcs)
XR0203070 Large knurled pin (100 pcs)
XR0203080 Large knurled pin (1000 pcs)
XR0203090 Medium knurled pin (100 pcs)
XR0203100 Medium knurled pin (1000 pcs)
XR0203110 Large knurled pin with drill (100 pcs)
XR0203120 Large knurled pin with drill  (1000 pcs)

Troubleshooting

ISSUE CAUSE REMEDY
Bit breaks. 1. Incorrect squaring of the model (model base not flat or uneven).
2. Lateral movement during drilling.		 1. Square the model properly (lateral
movement during drilling).
2. Grip the model more firmlyduring drilling.
Model breaks. 1. Model not fully hardened.
2. Model base too thin.
3. Lateral movement during drilling.		 1. Allow the model to harden properly.
2. Make the model base thicker.
3. Prevent lateral movement during drilling.
Dowels not parallel. 1. Incorrect securing of pins (hole in the model probably too big for the pin head). 1. Use bits and pins of same diameter.
To read all the documents in PDF format, you need to download a PDF viewer program. We suggest Adobe® Acrobat® Reader program, available for free from the following web site: www.adobe.com Note: programs versions are available for all operating systems.

© Zhermack SpA - All rights reserved - Via Bovazecchino, 100 45021 Badia Polesine (RO), Italy
Tel. +39 0425 597611 - Fax. +39 0425 53596 - Email web@zhermack.com
P.IVA 00594630295 - C.F. P.IVA IT00594630295 - R.E.A. 86603 - R.I. RO 00594630295 - M. RO 001381Isc. Reg. A.E.E. IT07111000002 - Cap. Soc. € 1.032.000,00

Credits - Terms and Conditions of Use - Work with us