Image

Press  |  Fairs  |  Contacts

Esegui ricerca

Select  language 

SATOR 2

DescriptionDetailDownload

Hydrogen microsolderer for welding of metal alloys with deposit materials. Designed for precision welding on all types of alloys and for orthodontic use (except titanium alloys)

Advantages

  • Ability to produce concentrated and completely inoxidisable flames for very precise microsoldering on bridges, crowns, attachments and removable prostheses
  • Completely safe and dependable apparatus
  • Advanced safety system guaranteed by an internal pressure regulator
  • Completelt electric power source with no need for air or gas connection
  • 1-year warranty

Characteristics

  • Hydrogen flame generated by electrolysys of supplied caustic deoxidised solution
  • Maximum production of 90 litres gas/hour
  • Flame check valve protection systems
  • Flame regulation system made up of a Litre/gas counter and an adjustable handpiece

 

Discontinued product, available while supplies last.

Technical Data

Size
L42cm / P37 cm/ H32 cm
Max temperature
3000°C
Hydrogen production
90 l/h
Total power
600 Watt
Voltage (V-Hz) 230 V ± 10% / 50-60 Hz
Weight
29 Kg

Packaging

C307100 Sator  2 Hydrogen welding machine

Standard components

XI0210020 Adjustable handpiece
XI002055 Funnel
  Sintered filter
  Needle ø 0.50 mm
  Needle ø 0.90 mm
  Caustic solution (x 2 - 2 litres)
  Deoxidizer solution 0.5 litres)

Accessories

XR0210030 Sintered filtered (10 pcs)
XR0210040 Needles ø 0.50 mm (12 pcs)
XR0210050 Needles ø 0.58 mm (12 pcs)
XR0210060 Needles ø 0.90 mm (12 pcs)




XR0210095 XR0210070
Caustic solution (4 pcs) Deoxidizer solution (4 pcs)

 

Troubleshooting

ISSUE
 CAUSE
 REMEDY
The excess pressure safety
valve has tripped.
 1. Nozzle obstructed.
2. Handpiece closed.
3. Handpiece obstructed.
4. Gas does not exit rubber
hose (sintered filters clogged).
5. (External) gas feed hose
(9) obstructed.		 1. Replace nozzle.
2. Open handpiece.
3. Remove the handpiece from the
rubber hose and blow in
compressed air from the nozzle
connector end. Warning: before
cleaning always remove the nozzle
from the handpiece. If it is still
obstructed contact your Authorised
Service Centre.
4. Change sintered filters.
5. Blow compressed air in
hydrogen gas feed pipe (9)..
Flame has wrong colour:
1. Yellow.
2. Reddish (small oxidative flame).		 1. The sintered filter has
been wetted with the
Deoxidizer Solution or dirtied
with Caustic Solution.
2. Change both Deoxidizer
Solution and sintered filter.		 1. Check level of Solutions: reduce
levels or change sintered filter.
2. Change Deoxidizer Solution and
sintered filter.
The flame is small and produces
little heat.		 1. Caustic solution level inexact. 1. Check the reading on the current
indicator; about twenty minutes after
switching on, with the regulator turned
to maximum, check the Caustic
Soda level.
The level of Caustic Solution shown
on the level indicator (12) must be
about 1 cm below maximum level. If
the level is lower add distilled water.
If with the right level the ammeter
reading is less than 50 Amperes
change the caustic solution.
To read all the documents in PDF format, you need to download a PDF viewer program. We suggest Adobe® Acrobat® Reader program, available for free from the following web site: www.adobe.com Note: programs versions are available for all operating systems.

© Zhermack SpA - All rights reserved - Via Bovazecchino, 100 45021 Badia Polesine (RO), Italy
Tel. +39 0425 597611 - Fax. +39 0425 53596 - Email web@zhermack.com
P.IVA 00594630295 - C.F. P.IVA IT00594630295 - R.E.A. 86603 - R.I. RO 00594630295 - M. RO 001381Isc. Reg. A.E.E. IT07111000002 - Cap. Soc. € 1.032.000,00

Credits - Terms and Conditions of Use - Work with us