SAND S 24 R

Dual-module sandblasting machine with recycle

Advantages

  • Excellent visibility and lighting inside the chamber
  • Completely pneumatic
  • Great dependability and low maintenance for a minimum investment cost
  • 1-year warranty

Characteristics

  • Equipped with two cylinders with a usable capacity of approximately 0.5 litres each 
  • Adjustable pressure with pressure regulator and relative readable 
  • Two handpieces with nozzles (0.8 mm and 1.3 mm respectively) ready to work with aluminium oxide/ glass beads 
  • Air pumping system within the cylinders which allows the grit to exit completely from the nozzles 
  • Selector for which cylinder to be used inside the chamber 
  • Pedal control 
  • Power supply plug and exit pipe to connect to the extractor 
  • Protective sheet placed on closure window 
  • Recycling system, equipped with ø 3 mm tungsten carbide nozzle, which allows the material deposited on the bottom to be reused for rough-shaping operations
     

 

Not all products are sold in every country.

Technical Data

RecyclingYes
Size
L37 cm / P42 cm / H37 cm
Number of tanks
2
Total power9 Watt
Voltage (V-Hz)230 V ± % / 50-60 Hz
Weight
11 Kg

Packaging

C305604S 24 R Sandblasting machine with recirculating system

Accessories

XB0060650Additional module, third cylinder for Dune 2
XR0061540Dune glass protection (5 pcs)
C308100White aluminium oxide 25 µm  -  4 Kg
C308102White aluminium oxide 50 µm  -  4 Kg
C308104White aluminium oxide 75 µm  -  4 Kg
C308106White aluminium oxide 90 µm  -  4 Kg
C308108White aluminium oxide 110 µm  -  4 Kg
C308110White aluminium oxide 125 µm  -  4 Kg
C308112White aluminium oxide 150 µm  -  4 Kg
C308114White aluminium oxide 180 µm  -  4 Kg
C308116White aluminium oxide 250 µm  -  4 Kg
C308118Black corundum 250 µm - 10 Kg
C308119Microscopic glass beads 40/70 µm - 3 Kg
C308121Microscopic glass beads 90/150 µm - 3 Kg
C308123Microscopic glass beads 150/250 µm - 3 Kg
C305608SAB 1000 Extractor for sandblasting machines
XR0060065Glass protection sheets

Standard components


XR0060040nozzle ø 0.8 mm
XR0060050nozzle ø 1.3 mm
XR0060055nozzle ø 3.0 mm for recirculating

Troubleshooting

ISSUE
CAUSE
REMEDY
The main switch is turned to ON but
the light does not come on.
1. The light bulb has been damaged.
2.The sandblasting equipment power lead is
not correctly inserted in the socket or is faulty (frayed
wiring, damaged etc.).
1. Replace the light bulb.
2. Check that the plug is inserted
correctly or replace the power
lead. If the problems persists
contact an Authorised Service Centre.
The sand does not exit the nozzle
feed duct or the nozzle correctly.
1. Feed duct is clogged.
2. Nozzle is clogged.
3. Tank closure knob is not tightened properly.
4. Tank lid seal s worn.
5. No sand inside the tank.
6. Sands of microns different from those
indicated on the tank have been used.
7. The feed duct has a hole in it.
1. Unscrew the sandblasting nozzle
crown, remove it and repeatedly
press the pedal control until
the sand is freed from the duct.
2. Free the nozzle hole.
3. Close the tank hermetically with
the closure knob.
4. Change the lid seal.
5. Introduce sand into the sanding
chamber.
6. Change the tank and introduce
sand with the micron rating
indicated on the tank.
7. Change the feed duct.
The sand does not exit the recycle
sandblasting block properly (versions
S24R - S25R)
1. The sand recycle device is clogged.1. Close the recycle nozzle (for
the S24R press the control pedal
repeatedly too) so that the air
pressure brings the sand clot
towards the interior.
To read all the documents in PDF format, you need to download a PDF viewer program. We suggest Adobe® Acrobat® Reader program, available for free from the following web site: www.adobe.com Note: programs versions are available for all operating systems.

© Zhermack SpA - All rights reserved - Via Bovazecchino, 100 45021 Badia Polesine (RO), Italy
Tel. +39 0425 597611 - Fax. +39 0425 53596 - Email web@zhermack.com
P.IVA 00594630295 - C.F. P.IVA IT00594630295 - R.E.A. 86603 - R.I. RO 00594630295 - M. RO 001381Isc. Reg. A.E.E. IT07111000002 - Cap. Soc. € 1.032.000,00

Credits - Terms and Conditions of Use - Work with us